Overview
POM sheet — polyoxymethylene plate, also sold as acetal sheet or Delrin sheet — is produced by extruding or compression-moulding POM granules into flat stock, then cutting it to size or machining it into finished parts. POM is a high-crystallinity, high-melting-point engineering thermoplastic: it machines like brass, holds tolerances without absorbing moisture, and slides against steel without lubrication. That combination makes POM plate the default stock for fixture plates, wear pads, gears and machined components that must stay dimensionally stable.
ORRO supplies POM plate in natural (white/ivory), black and blue, in thicknesses from 3 mm to 120 mm, and can cut it to your blank size or machine finished parts directly from the sheet. Both homopolymer (POM-H / Delrin-type) and copolymer (POM-C / Celcon-type) grades are available — copolymer for hot-water and chemical exposure, homopolymer for maximum stiffness and fatigue life.
Material Specifications
| Property | Typical value |
|---|---|
| Density | 1.43 g/cm³ |
| Tensile strength at yield | 60.3 MPa |
| Tensile strength at break | 65 MPa |
| Elongation at break | 25% |
| Flexural modulus | 1,700 MPa |
| Charpy impact strength (unnotched) | 74 kJ/m² |
| Hardness | 84 (Rockwell M) |
| Melting point | 165 °C |
| Max. continuous service temperature | 110 °C |
| Max. short-term service temperature | 150 °C |
| Water absorption (24 h) | 0.2% |
| Colour | Natural / black / blue (other colours on request) |
Figures are typical for standard unfilled POM sheet at 23 °C. Glass-filled, anti-static and food-grade grades differ — the grade-specific datasheet governs.
Key Features
- Metal-like strength and rigidity — high tensile and flexural strength with excellent creep resistance under sustained load.
- Dimensional stability — very low moisture absorption, so a machined plate keeps its size in humid or wet workshops.
- Low friction, good wear — natural lubricity and a low coefficient of friction allow dry sliding against steel and aluminium.
- Excellent fatigue life — survives millions of load cycles, which is why it is used for snap fits and spring elements.
- Impact resistance at low temperature — keeps reasonable toughness down to −40 °C.
- Easy, precise machining — clean chips, fine threads, sharp edges; ±0.02 mm is routine.
- Physiologically safe grades — food-contact compliant POM is available for filler, packaging and conveyor parts.
Sheet Forms and Customization
| Item | Range |
|---|---|
| Thickness | 3 mm – 120 mm (thin sheet from 0.5 mm on request) |
| Standard sheet size | 610 × 1220 mm, 1000 × 2000 mm |
| Cut-to-size blanks | Any rectangular size within the sheet, sawn or CNC routed |
| Colour | Natural, black, blue; custom colour on volume order |
| Grades | POM-H, POM-C, glass-filled, food-grade, anti-static, flame-retardant |
| Further processing | CNC milling/turning of finished parts, drilling, tapping, engraving |
Customization services we accept:
- Light customization — cut to size, edge trimming, drilling, chamfering from stock plate.
- Drawing-based customization — finished machined parts from your 2D drawing or 3D model, with tolerances and surface finish to specification.
- Sample-based customization — send a physical sample and we reverse-engineer the geometry and material grade.
- On-demand customization — thickness, sheet size, colour and grade combined to your requirement, including flame-retardant and food-contact grades.
Typical Applications
Industrial automation and fixtures
Fixture plates, guide rails, wear pads, star wheels, and jigs where a stable, low-friction, non-marking surface is needed.
Food processing and packaging
FDA-grade POM conveyor guides, sprockets, filler parts and cutting boards that must resist cleaning agents and repeated washdown.
Automotive
Fuel-system components, window-regulator parts, seat mechanisms and pump internals machined from plate or rod.
Electrical equipment
Insulating mounts, spacers and switch components — POM has good dielectric strength and is available in anti-static grades for ESD-sensitive areas.
Pumps, valves and water treatment
Valve seats, wear rings, bushings and impeller parts for neutral and lightly aggressive media.
Machining Capabilities
| Parameter | Capability |
|---|---|
| Cutting tolerance (blanks) | ±0.5 mm sawn, ±0.1 mm routed |
| Machined tolerance | ±0.02 mm typical, ±0.01 mm on request |
| Surface finish | Ra 0.8 – 1.6 µm machined |
| Max. part size | 1000 × 2000 mm sheet footprint |
| Processes | Sawing, CNC routing, milling, turning, drilling, tapping |
| Edge finish | Sawn, milled, chamfered, polished |
POM cuts freely with carbide tooling; the main risks are melt-smearing from recutting chips and internal stress in thick sections. We stress-relieve thick plate before fine machining and use air blast rather than coolant where possible.
Quality and Delivery
Sheet is supplied with grade identification and batch traceability. Our factory is ISO 9001 certified and products are RoHS tested; food-contact grades come with the relevant compliance declaration. Samples are available — the customer pays freight only. Stock items ship in 5–15 days; custom cut or machined orders typically 15–30 days.
Application Case
Wear pad for a packaging line, POM-C plate — A packaging OEM was replacing bronze wear pads every eight weeks on an aluminium guide track, and the bronze was marking the product. ORRO supplied 20 mm POM-C plate cut and machined to the original pad profile, with a 0.05 mm flatness callout. The acetal pads ran dry, stopped marking the packs and were still within tolerance after twelve months, at roughly one third of the bronze part cost.
FAQ
Are you a trading company or a manufacturer?
We are a manufacturer. Our factory has more than 25 years of experience in producing electrical insulation materials and engineering plastics, and we machine POM sheet in-house.
Where is your factory, and can I visit?
Our factory is in Shandong Province, China. Visits are welcome — contact us in advance and we will arrange the schedule.
What certifications do you have?
The factory is ISO 9001 certified, and our products are RoHS tested. Food-contact grades are supplied with the corresponding compliance documents.
Can I get a free sample?
Yes. We can send a sample piece for evaluation; the customer only covers the freight.
What is the lead time?
Stock sheet is normally shipped in 5–15 days; custom cut or machined orders take 15–30 days depending on quantity and specification.
What thickness tolerance can you hold on cut plate?
Sawn blanks are typically ±0.5 mm on thickness; where the plate is machined flat, we hold ±0.1 mm or better. Tell us the tolerance at enquiry stage so the correct stock thickness is reserved.
Can you supply food-grade POM sheet?
Yes — food-contact POM in natural or blue is available with a compliance declaration. Standard black industrial stock is not automatically food-grade, so state the requirement on the enquiry.
Send your drawing, sheet size or sample — we will confirm the grade, thickness and cut plan, and quote the sheet or finished part. Request a Quote
Looking for machined parts rather than stock plate? See POM gears, POM bearing sleeves and POM track rollers, or read the full POM material guide for grades and selection advice.