These are the questions that come up in nearly every enquiry. If yours is not here, ask it directly — we answer technical questions before quoting.
What is your minimum order quantity?
Our standard minimum order quantity is 100 pieces per part number. Smaller quantities — a prototype or a single replacement part — are quoted as sample orders at a sample price, and most buyers start there before committing to a production run.
What tolerance can you hold?
±0.05 mm is routine on most engineering plastics; ±0.01 mm is achievable on POM, PEEK and PTFE with controlled fixturing and temperature. On rubber and elastomers, tolerances follow the moulded or cut condition rather than machining. Ceramics are ground on the functional faces. Always state the features that matter, not a blanket tolerance on the whole drawing.
Do you charge tooling, and who owns it?
For turned and milled parts there is normally no tooling charge — we program from your drawing and machine from stock. Moulded or pressed rubber parts need a mould; we quote that separately and the mould is normally paid for by the first production order.
How long does a quote and an order take?
Quotes are usually returned within 24–48 hours once we have a drawing and the operating conditions. Prototypes normally ship in one to two weeks; repeat production depends on material availability — PEEK and some ceramic grades are special order, so confirm early.
Can I get a sample before mass production?
Yes. We recommend one. We machine samples to your drawing, and you test fit, temperature and chemical resistance before committing to volume. Sample cost is credited on many repeat orders.
What drawings do you need?
A 2D drawing with dimensions and tolerances is preferred, plus a 3D step file if you have one. If you only have a sample or a sketch, send a photo with a scale (or the part itself) and we will measure it and confirm critical dimensions in writing before machining.
Which material should I choose?
Send the operating temperature, the medium it touches, the load and the required tolerance, and we will recommend a grade. The material selection guide is a good starting point, and every material page carries a full ten-section selection guide.
Do you supply food-grade and medical-grade material?
Yes — FDA-compliant and USP Class VI grades of PTFE, POM, PEEK, silicone and EPDM are available, with material certificates. State the requirement on the enquiry; standard industrial stock is not automatically compliant.
What about surface finish and colour?
As-machined finish is standard; finer finishes are produced with reduced feed and finishing passes, and polishing or bead blasting is available on request. Colour depends on the stock grade — natural, black, and filled grades such as carbon-filled (black) and glass-filled (usually off-white). Custom colour needs a moulded part or pre-coloured stock.
Can you sign an NDA and handle my drawings confidentially?
Yes. We work under NDA on request and do not reuse customer drawings or parts for other customers.
How is the order shipped and paid for?
Parts ship from China by express courier for samples and small batches, or by air and sea freight for volume. Incoterms and payment terms are agreed per order; typical first orders are a deposit with the balance against the shipping documents.
- Start a quote: send us your drawing
- Material help: selection guide
- Machining detail: process guide