How to Send a Drawing That Gets an Accurate Quote First Time

Most quotes come back vague for one reason: the enquiry was vague. A machined plastic part cannot be priced from a shape alone, because the same geometry costs very different amounts depending on material, tolerance and how well the part can be held in the machine. Here is what to send.

The drawing

A 2D drawing in PDF is ideal, with:

  • Datum clearly marked — the face or bore the part is installed against.
  • Tolerances on the dimensions that matter, not a blanket note.
  • Material and grade — “POM” is not enough if you need FDA-compliant or glass-filled stock; say “POM, natural, FDA” or “POM-C, black”.
  • Surface finish on any face that seals, slides or is visible.
  • Threads and fits in full detail (for example M6 × 1, or a stated shaft/hole fit).
  • Quantity, and whether the price is being compared at one piece or at volume.

If you have a 3D step file, send it too. It lets us check the geometry against the 2D dimensions before anything is cut. The 2D drawing governs the tolerances.

What we cannot get from a drawing

Three things decide the material choice and the machining plan, and none of them appear on a drawing:

  1. Operating temperature — maximum continuous, and any peaks.
  2. The medium the part touches — which chemical, at what concentration, and whether it is wet or dry.
  3. The load and the motion — static or rotating, continuous or shock, and whether it runs unlubricated.

Give us those three and we will not only price the part, we will tell you if the material on the drawing is the wrong one. Quite often we do.

A sketch or a sample is acceptable

You do not need a fully drafted drawing to start. A photo with a ruler in frame, a hand sketch with key dimensions, or the worn original part sent by courier is enough for us to measure, confirm the critical dimensions in writing, and quote from that. On reverse-engineered parts we always confirm the dimensions before machining, so a mis-measurement does not become a scrapped batch.

What you get back

  • A price per piece at your stated quantity, with quantity breaks where relevant
  • Lead time and the material grade we intend to use
  • Any question we need answered before we can guarantee the tolerance
  • Usually within 24–48 hours of a complete enquiry

Common gaps that slow an order down

  • A blanket ±0.01 mm on the whole part with no indication of what functions.
  • “Plastic” or “nylon” with no grade, when the application is medical or food contact.
  • No temperature or chemical information on a seal or valve part.
  • An SST or a screenshot of a CAD model with no dimensions.

Fix those four and the process usually runs straight from quote to first article.

Send it now

Contact us with your drawing and the three operating conditions. If you are still choosing a material, the material selection guide covers all fourteen grades we machine, and the FAQ answers the commercial questions — MOQ, tooling, samples and lead time.

Need Custom Manufacturing?

Submit your drawings and specifications. We evaluate each project and quote within 24-48 hours.

Contact Us